Sunday, January 3, 2010

Small Rv Trailers Can I Use The One Pound Propane Bottles To Run A Small, 2 Burner RV Cooktop? Will A Single Stage Reg Work?

Can I use the one pound propane bottles to run a small, 2 burner RV cooktop? Will a single stage reg work? - small rv trailers

I have a 2-burner in a small trailer with no seal on the bottle of propane. Can I require is 1 pound bottles directly on the stove or a regulator?

3 comments:

Propane Guy said...

No. .. a regulatory body is required. and should be a dual-stage design. If you say you have a 2-RV stove burner, I believe that in your RV is not built its own camp stove.

You need the tanks of propane, a two-stage regulator is mounted to be made, then run a line into the oven. The line can not be run through a window or door. You need to have a hole in the wall and the line passing through this way ...

Especially in the colder temperatures, the book is not evaporate enough to operate a furnace. You need at least one cylinder of 20 pounds, if not bigger. You see, the cylinder is not only a reservoir. It must be sufficiently large that it can absorb enough heat in the air around him, to the liquid propane to boil and produce steam for making the camera. If it is too small, the cylinder blocks and function properly, the machine simply not enough fuel on board.

You really need a licensed gas fitter in this issue for you, and recommendations. There is little margin for error ifWorking with this type of fuel. It is simply too dangerous to guess. Let a professional body for you and you can sleep soundly knowing that this is a safe investment ... Hope this helps!

Dennis M said...

when the bottle hook to the cook top group and not leave the bottle too close to the FLAM and a regulator must be used, the pressure is only about 3 pounds per square inch into the recorder, you will never be able to only one valve do.

Dennis M said...

when the bottle hook to the cook top group and not leave the bottle too close to the FLAM and a regulator must be used, the pressure is only about 3 pounds per square inch into the recorder, you will never be able to only one valve do.

Post a Comment